Author Archives: katia

How to Make a Killjoy Gun

Posted on by

So now that you know how to draw a Killjoy Gun, let me show you how to make your gun 3-D!

First, get some poster board or card board and trace the shape of the gun onto it, then carefully use an exacto knife and cut it out.

 

Now, remember your drawing? Cut that out and make a flipped copy of it. The flipped copy will be on the other side of the poster board.

Now cut out the flipped copy and glue each picture onto the correct side of your poster board. If you don’t want to ruin your original drawing, make a copy of it and use that.

Tada! And now you are done! Have fun with your knew Killjoy laser gun! :D

Posted in Art |

How to Draw a Killjoy Gun

Posted on by

For my Halloween costume I’m gonna be a Killjoy, the newest era of My Chemical Romance. To do this, I need a super cool lazer gun. So I made one! This is how to draw one.

First, put on some tunes to jam too to relax and get the creativity flowing.

Start from right to left beginning with the barrel. Careful with the strait lines: use a ruler if you must.

Now draw the top of the gun and start to draw the middle.

 

This step is a bit complicated. Finish the top section of the gun, the draw a line from the barrel to the trigger. Then, draw all the inside stuff, and don’t leave out the little screws!

Draw the handle and finish with the back side of the gun.

Draw the little gadgets inside. These are important!

Now for outlining! For a good outline, use different thickness of your outlining tools.

Use a steady hand

Use a thick sharpie to outline the outside thick lines.

Use a thin sharpie for the fine inside lines.

Color your gun!

Color the main parts one color

And the inside another color.

Don’t forget to sign and date your picture!

Tada! Your gun is complete! Enjoy! J